I want candy to give you pet for some fun? Then it’s a project for you. washable dog bed fabric used this old show, you do not need-based dog. Use sturdy fabrics years also use the project will be made rich. Only fabric, scissors and tools to complete the project in one afternoon, the configuration can facilitate.
Make the bed:
Cloth bag for sure. Two 14-inch 16-inch circle and cut out two circles vintage fabrics. 13 inches 30 inches that precisely measure a piece of cloth.
Certain foam padding. Cut a circle 12 inches and 29 inches 5 inches of foam foam strip.
Sew along the base of the bed. Right fabric, 14 inches Exterior view, place the fabric circle. 0.5-inch seam circuit with the money. Let’s 5-inch hole to insert the foam circle.
Exit the bed base. Turn the fabric right side unwarranted. To ensure the opening bubbles apartment is a little easier, you can nearly eliminate foam. Slide the foam circle in front of the base. Will leave behind an additional loose fabric. “Ruins” Adding more than 0.5 inch mattress fabric is used to connect this part. Stitch the opening closed.
Sew along the back of the bed. Half cloth 13 inches long, 30 inches, fold the strip. On the right side of the fabric must be mutually opposite. You .0.5 inch seam allowance, along the raw edges (incomplete) should be adapted to the brink protect the seams.
Finish the bed back. (Inverted) long strip of cloth translation outside and the inside. And external to the right, the track will seem like a long tube. Pipes can work on the foam strip. At each end of the tube should be loose texture inches.
Connect with base. Both the center, shows a piece of chalk to find the crease. Half shows a turn-based chalk floor center. Pin the back of the base of the bed. Head back and in a safe place, make sure both are targeted. Let the bed base in the bottom of the fixed bed sewing .0.5 inch seam allowance page. Turn loose fabric, sew the open end of the inner tube.
Sewing pillows. 16-inch flat pin .0.5 inch seam allowance, stitch together to keep the seam facing the right side. A polyfill 5-inch opening and release.
Fill the pillow. Polyester cotton pillow cushion themselves right. Stitch the opening closed.
Place the finished bed with a pillow.